Tag: afm tips

New Insights in the Ion Beam Sputtering Deposition of ZnO-Fluoropolymer Nanocomposites

Surface modification treatments able to confer antistain/antibacterial properties to natural or synthetic materials are receiving increasing attention among scientists. Ion beam co-sputtering (IBS) of zinc oxide (ZnO) and poly-tetrafluoroethylene (PTFE) targets allows for the preparation of novel multifunctional coatings composed of antimicrobial ZnO nanoparticles (NPs) finely dispersed in an antistain PTFE polymeric matrix.*

In the article “New Insights in the Ion Beam Sputtering Deposition of ZnO-Fluoropolymer Nanocomposites” Maria Chiara Sportelli, Marco Valentini, Rosaria Anna Picca, Antonella Milella, Angelo Nacci, Antonio Valentini and Nicola Cioffi describe the use of X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and transmission electron microscopy (TEM) for the characterization of the IBS deposited coatings in order to obtain information on the materials’ surface composition, with deep insight into the nanocoatings’ morphology as a function of the ZnONP loadings.*

The AFM micrographs shown in this article were acquired on 150-nm-thick films in dynamic (“tapping”) mode, in air, using NanoWorld Pointprobe® NCL AFM probes.

Figure 2 from “New Insights in the Ion Beam Sputtering Deposition of ZnO-Fluoropolymer Nanocomposites” by Maria Chiara Sportelli et al.: Atomic force microscopy (AFM) micrographs of ZnO-CFx nanocomposites having an inorganic phase volume fraction of φ = 0.05 (a–a’), φ = 0.10 (b–b’), and φ = 0.15 (c–c’). NanoWorld Pointprobe® NCL AFM probes were used.
Figure 2 from “New Insights in the Ion Beam Sputtering Deposition of ZnO-Fluoropolymer Nanocomposites” by Maria Chiara Sportelli et al.: Atomic force microscopy (AFM) micrographs of ZnO-CFx nanocomposites having an inorganic phase volume fraction of φ = 0.05 (a–a’), φ = 0.10 (b–b’), and φ = 0.15 (c–c’).

*Maria Chiara Sportelli, Marco Valentini, Rosaria Anna Picca, Antonella Milella, Angelo Nacci, Antonio Valentini and Nicola Cioffi
New Insights in the Ion Beam Sputtering Deposition of ZnO-Fluoropolymer Nanocomposites
Applied Sciences 2018, 8(1), 77
DOI: 10.3390/app8010077

Please follow this external link for the full article: https://www.mdpi.com/2076-3417/8/1/77/htm

Open Access: The article « New Insights in the Ion Beam Sputtering Deposition of ZnO-Fluoropolymer Nanocomposites » by Maria Chiara Sportelli et al. is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.

NanoWorld™ appoints NanoAndMore Japan as a distributor for Japan

In a further move to extend its worldwide network of distribution partners NanoWorld™ today has appointed the recently founded NanoAndMore Japan KK (NanoAndMore ジャパン ) as a distributor of its line of probes for Atomic Force Microscopy (AFM) and Scanning Probe Microscopy (SPM) in Japan.

NanoAndMore Japan will keep a large stock of NanoWorld AFM probes on site enabling a fast delivery and will sell NanoWorld AFM probes at manufacturer recommended prices.

NanoWorld™ is convinced that this addition to the already existing distribution network will work for the benefit of its customers.

NanoAndMore ジャパン CEO Mr. Nobuhiro Saito has many years of AFM expertise and is looking forward to assisting customers with the selection of the right AFM probes for their various application needs.

Please refer to the contact data below or to our list of distributors on the “how to buy” page on the NanoWorld webpage.

NanoAndMore ジャパン
201 KTT5 Building, 1-1-1 Waseda, Misato-shi
Saitama-ken 341-0018
Japan

Phone: +81 (48) 951-0958

Contact: Mr. Nobuhiro Saito
info@nanoandmore.jp
www.nanoandmore.jp

NanoWorld Ultra-Short-Cantilevers (USC) - AFM tips for video rate atomic force microscopy
NanoWorld Ultra-Short Cantilevers (USC) for High-Speed AFM (HS-AFM)

In Situ Molecular-Level Observation of Methanol Catalysis at the Water–Graphite Interface

“Methanol occupies a central role in chemical synthesis and is considered an ideal candidate for cleaner fuel storage and transportation. It can be catalyzed from water and volatile organic compounds, such as carbon dioxide, thereby offering an attractive solution for reducing carbon emissions.”*

In “In Situ Molecular-Level Observation of Methanol Catalysis at the Water–Graphite Interface” the authors show that graphite immersed in ultrapure water is able to spontaneously catalyze methanol from volatile organic compounds in ambient conditions. Using single-molecule resolution atomic force microscopy (AFM) in liquid, they directly observe the formation and evolution of methanol–water nanostructures at the surface of graphite.*
The findings described in this article could have a significant impact on the development of organic catalysts and on the function of nanoscale carbon devices

NanoWorld ARROW-UHFAuD AFM probes were used for the Atomic Force Microscopy imaging in liquid.

Figure 1 from “In Situ Molecular-Level Observation of Methanol Catalysis at the Water–Graphite Interface” by W. Foster et al.: High-resolution amplitude modulation AFM imaging of HOPG immersed in initially ultrapure water. (a) A solid-like patch formed by the self-assembly of molecules (dashed white outline) nucleates from an atomic step at the HOPG surface (dashed black line). The molecular self-assembly is observed here in situ as it progressively grows across the HOPG surface over a period of 9 min, with the patch edges moving away from the step. Rowlike structures with a periodicity of 4.30 ± 0.28 nm as visible within the patch. (b) Sub-nanometer imaging of other structures reveals detailed features (0.79 ± 0.08 nm periodicity, red arrows) perpendicular to the main rows (periodicity 2.45 ± 0.08 nm, white arrow). The exact molecular arrangement is not known, but strongly reminiscent of the alternated water–methanol nanoribbons recently reported by our group.(22) The white scale bars are 100 nm in (a) and 1 nm in (b). The purple color scale bar represents a topographic variation of 20 Å in (a) and 1 Å nm in (b). The blue scale bar represents a phase variation of 20° in (a) and 10° in (b). In (a) the time lapse between the first and second frames is 1 min and then 4 min elapses between the subsequent frames. NanoWorld Arrow-UHFAuD AFM probes were used.
Figure 1 from “In Situ Molecular-Level Observation of Methanol Catalysis at the Water–Graphite Interface” by W. Foster et al.: High-resolution amplitude modulation AFM imaging of HOPG immersed in initially ultrapure water. (a) A solid-like patch formed by the self-assembly of molecules (dashed white outline) nucleates from an atomic step at the HOPG surface (dashed black line). The molecular self-assembly is observed here in situ as it progressively grows across the HOPG surface over a period of 9 min, with the patch edges moving away from the step. Rowlike structures with a periodicity of 4.30 ± 0.28 nm as visible within the patch. (b) Sub-nanometer imaging of other structures reveals detailed features (0.79 ± 0.08 nm periodicity, red arrows) perpendicular to the main rows (periodicity 2.45 ± 0.08 nm, white arrow). The exact molecular arrangement is not known, but strongly reminiscent of the alternated water–methanol nanoribbons recently reported by our group.(22) The white scale bars are 100 nm in (a) and 1 nm in (b). The purple color scale bar represents a topographic variation of 20 Å in (a) and 1 Å nm in (b). The blue scale bar represents a phase variation of 20° in (a) and 10° in (b). In (a) the time lapse between the first and second frames is 1 min and then 4 min elapses between the subsequent frames

*William Foster, Juan A. Aguilar, Halim Kusumaatmaja, Kislon Voϊtchovsky
In Situ Molecular-Level Observation of Methanol Catalysis at the Water–Graphite Interface
ACS Appl. Mater. Interfaces, 2018, 10 (40), pp 34265–34271
DOI: 10.1021/acsami.8b12113

Please follow this external link for the full article: https://pubs.acs.org/doi/full/10.1021/acsami.8b12113

Open Access The article “In Situ Molecular-Level Observation of Methanol Catalysis at the Water–Graphite Interface” by William Foster, Juan A. Aguilar, Halim Kusumaatmaja and Kislon Voϊtchovsky is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.