Category: News

Analysis of long dsRNA produced in vitro and in vivo using atomic force microscopy in conjunction with ion-pair reverse-phase HPLC

Long double-stranded (ds) RNA is emerging as a novel alternative to chemical and genetically-modified insect and fungal management strategies. The ability to produce large quantities of dsRNA in either bacterial systems, by in vitro transcription, in cell-free systems or in planta for RNA interference applications has generated significant demand for the development and application of analytical tools for analysis of dsRNA.*

In their article “Analysis of long dsRNA produced in vitro and in vivo using atomic force microscopy in conjunction with ion-pair reverse-phase HPLC” Alison O. Nwokeoji, Sandip Kumar, Peter M. Kilby, David E. Portwood, Jamie K. Hobbs and Mark J. Dickman have utilised atomic force microscopy (AFM) in conjunction with ion-pair reverse-phase high performance liquid chromatography (IP-RP-HPLC) to provide novel insight into dsRNA for RNAi applications.*

The AFM analysis enabled direct structural characterisation of the A-form duplex dsRNA and accurate determination of the dsRNA duplex length.*

The work presented in this study demonstrates the ability of AFM in conjunction with IP RP HPLC to rapidly assess sample heterogeneity and provide important structural information regarding dsRNA.*

For the high resolution images presented in Fig. 1(A, B) and 2(B) in the article NanoWorld Ultra-Short Cantilevers USC-F1.2-k0.15 with a High Density Carbon tip (nominal values: tip radius 10 nm, cantilever length 7 μm, stiffness 0.15 N m−1, resonant frequency 1200 kHz in air) were tuned to 600–650 kHz, oscillated at a free amplitude of <30 mV and scanned at a rate of 0.4–1.0 μm s−1,to visualize the dsRNA and dsDNA grooves.*


Fig. 1 A and B from “Analysis of long dsRNA produced in vitro and in vivo using atomic force microscopy in conjunction with ion-pair reverse-phase HPLC” by Alison O. Nwokeoji et al. :
Analysis of dsRNA monomers, multimers and higher order assemblies under non-denaturing conditions. Non-denaturing gel electrophoretograms (A) in vivo synthesised dsRNA (521 bp and 698 bp) (B) in vitro synthesised dsRNA (504 bp). Each dsRNA sample was run in duplicate. The proposed dsRNA multimers or higher order assemblies with reduced electrophoretic mobility are highlighted above the corresponding dsRNA main band.

*Alison O. Nwokeoji, Sandip Kumar,Peter M. Kilby, David E. Portwood, Jamie K. Hobbs and Mark J. Dickman
Analysis of long dsRNA produced in vitro and in vivo using atomic force microscopy in conjunction with ion-pair reverse-phase HPLC
Analyst, 2019,144, 4985
DOI: 10.1039/c9an00954j

Please follow this external link for the full article: https://pubs.rsc.org/en/content/articlelanding/2019/an/c9an00954j

Open Access: The article « Analysis of long dsRNA produced in vitro and in vivo using atomic force microscopy in conjunction with ion-pair reverse-phase HPLC  by Alison O. Nwokeoji, Sandip Kumar,Peter M. Kilby, David E. Portwood, Jamie K. Hobbs and Mark J. Dickman is licensed under a Creative Commons Attribution 3.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit https://creativecommons.org/licenses/by/3.0/.

A Short Peptide Hydrogel with High Stiffness Induced by 310‐Helices to β‐Sheet Transition in Water

In the article “A Short Peptide Hydrogel with High Stiffness Induced by 310‐Helices to β‐Sheet Transition in Water” by Shu Hui Hiew, Harini Mohanram, Lulu Ning, Jingjing Guo, Antoni Sánchez‐Ferrer, Xiangyan Shi, Konstantin Pervushin, Yuguang Mu, Raffaele Mezzenga and Ali Miserez, a short biomimetic peptide composed of eight amino acid residues derived from squid sucker ring teeth proteins is demonstrated to form hydrogel in water without any cross‐linking agent or chemical modification and exhibits a stiffness on par with the stiffest peptide hydrogels.
Their study broadens the range of secondary structures available to create supramolecular hydrogels, and introduces 310‐helices as transient building blocks for gelation via a 310‐to‐β‐sheet conformational transition.*

The AFM images presented in this study were obtained in soft tapping mode using NanoWorld Pointprobe® NCSTR AFM probes.

Figure 1 from «A Short Peptide Hydrogel with High Stiffness Induced by
310‐ Helices to β‐Sheet Transition in Water” by Shu Hui Hiew et al.
Structural features and physico‐chemical properties of GV8 peptide hydrogel observed with time‐series spectroscopy measurements during gelation
b) AFM amplitude profile of dried GV8 hydrogel with fibers of ≈6–10 nm height.

*Shu Hui Hiew, Harini Mohanram, Lulu Ning, Jingjing Guo, Antoni Sánchez‐Ferrer, Xiangyan Shi, Konstantin Pervushin, Yuguang Mu, Raffaele Mezzenga, Ali Miserez
A Short Peptide Hydrogel with High Stiffness Induced by 310‐Helices to β‐Sheet Transition in Water
Advanced Science 2019, 1901173
Doi: https://doi.org/10.1002/advs.201901173

Please follow this external link to read the full article: https://onlinelibrary.wiley.com/doi/full/10.1002/advs.201901173

Open Access: The article « A Short Peptide Hydrogel with High Stiffness Induced by 310‐Helices to β‐Sheet Transition in Water » ” by Shu Hui Hiew, Harini Mohanram, Lulu Ning, Jingjing Guo, Antoni Sánchez‐Ferrer, Xiangyan Shi, Konstantin Pervushin, Yuguang Mu, Raffaele Mezzenga and Ali Miserez is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other thirdparty material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.